Mining3 and CR Digital announce partnership
Published by Jessica Casey,
Mining3 and CR Digital have announced a partnership with the next phase of development in Top of Coal technology. This announcement comes on the back of promising new results delivered from the most recent Bowen Basin trial, where the technology was tested over 12 weeks and collected downhole data from over 250 boreholes.
Accurately detecting the approaching top of a coal seam prior to blasting is fundamental to efficient coal recovery. During the extraction stage, a significant percentage (up to 12%) of overall coal loss is attributable to blast damage and coal dilution, which then makes it difficult to separate the coal cleanly from the waste during both overburden excavation and coal processing. By eliminating the damage done to the top of seam, substantial increases in recovery are enabled.
With support from Australian Coal Association Research Programme (ACARP), Mining3 has been developing a measurement while drilling (MWD) system that detects the top of a coal seam while routinely drilling blast holes.
During the drilling process, the detection system uses resistance measurements ahead of the drill bit to detect approaching coal in real-time. This method of detecting Top of Coal brings significant benefits to surface mining operations, including:
- Providing a reliable indication of the approach to Top of Coal that will enable drilling to be stopped before touching coal or at a minimum standoff distance.
- Increase production by reducing damage to coal from blasting.
- Strata recognition and mapping during routine blast hole drilling.
The system can also be retro fitted to a standard rotary air blast drill rig.
CR Digital, a leading mining technology company, and part of the global CR Group, is now working with Mining3 on the commercialisation of the technology, and the integration of the Top of Coal technology into their technology portfolio.
Together, Mining3 and CR Digital see potential for the technology to be an extension to the Thunderbird 1110 and StrataSense products within the CR Digital portfolio. Collectively, this agnostic range can be retro fitted to any rotary air blast drill rig and is intended to build on the StrataSense capability of CR Digital, to compile a 3D understanding of the bench and coal seam in real-time.
Read the article online at: https://www.worldcoal.com/coal/20082020/mining3-and-cr-digital-announce-partnership/
You might also like
Carbon capture technology developers break ground at Wyoming ITC
Two large carbon capture projects recently held a groundbreaking ceremony at the Wyoming Integrated Test Center (ITC).