Mitsubishi Heavy Industries completes IGCC plant construction
Published by Jessica Casey,
Editor
World Coal,
A consortium led by Mitsubishi Heavy Industries, Ltd (MHI) has completed the construction of an integrated coal gasification combined cycle (IGCC) plant in the town of Hirono, in Fukushima Prefecture’s Futaba District. The new plant was formally handed over to the customer, Hirono IGCC Power GK. Operation of the new facility, which is a high-efficiency, clean commercial power plant incorporating the world’s most advanced coal gasification technologies, got underway on 19 November 2021. The project called for creation of one of the world’s largest IGCC configurations, roughly twice the scale of the previously completed Nakoso Unit 10 (former IGCC demonstration plant). The new facility is the second IGCC plant of such large scale in commercial use, following the installation constructed for Nakoso IGCC Power GK that went into operation in Fukushima Prefecture’s Iwaki City this past April.
The Hirono project was completed with integration of next-generation thermal power generation technologies from MHI – including Mitsubishi Power – and three group companies. Mitsubishi Power, a power solutions brand of MHI, manufactured the core air-blown IGCC system, including the coal gasification furnace; Mitsubishi Heavy Industries Engineering, Ltd (MHIENG) was in charge of the gas refining equipment; Mitsubishi Electric Corporation oversaw production of generators and electrical equipment; and Mitsubishi Heavy Industries Power Environmental Solutions, Ltd was responsible for the wastewater treatment equipment.
The Hirono IGCC plant adopts a high-efficiency gas turbine combined cycle (GTCC) system integrating gas and steam turbines. Coal is gasified in a gasification furnace at high temperature under high pressure; sulfur, ash and the like are separated out and removed; and the refined gas is used as fuel to drive the gas turbine. Combusted waste gas is fed to a waste heat recovery boiler, and the generated steam is used to operate the steam turbine. Power generation efficiency is 48%. This high efficiency contributes to reduction of carbon emissions.
The IGCC plant construction project undertaken by Hirono IGCC Power GK incorporates the hopes and expectations of all stakeholders that the new plant, featuring the world’s most advanced thermal power generation technologies, will contribute to the creation of the local industrial infrastructure, and thereby to Fukushima’s regional recovery.
Through its participation in this IGCC project and the resulting adoption of another next-generation high-efficiency power generation system, MHI has made a significant contribution to the effective use of resources, to environmental protection, and to the revitalisation of the Fukushima region.
Read the article online at: https://www.worldcoal.com/power/24112021/mitsubishi-heavy-industries-completes-igcc-plant-construction/
You might also like
EIA reduces its forecast for US coal exports following Port of Baltimore closure
The US EIA has decreased its forecast for US coal exports following the collapse of the Francis Scott Key Bridge and the resulting closure of the Port of Baltimore.