Skip to main content

Loesche coal mills supplied to Jaworzno III power unit

Published by
World Coal,


Loesche Energy Systems signs a contract to supply five Loesche coal mills type LM 35.35 with LSKS Classifiers to Rafako SPV for a new power unit in TAURON Wytwarzanie S.A. Jawzorno III power plant in Poland.

Loesche Energy Systems is set to supply five Loesche coal mills type LM 35.35 with LSKS Classifiers to Rafako SPV for a new power unit in TAURON Wytwarzanie S.A. Jawzorno III power plant in Poland.

The Loesche mill was chosen because it delivers low mill different pressure and consequently, lower auxiliary power consumption. This strategic design improvement in the mill has been made over the last few years.

Jaworzno III power unit will have a 910 MW gross power and will be equipped with supercritical once-through pulverised fuel boiler for bituminous coal. The power plant is designed to have high-efficiency levels and to meet stringent European emissions standards.

The pulverised fuel throughput required to achieve boiler maximum continuous rating will be achieved with 4 + 1 LM 35.3 D mills; wherein four mills will be in operation and one will be on standby.

The mills will be delivered to Jawzorno III site in 2017.

Edited from press release by Harleigh Hobbs

Read the article online at: https://www.worldcoal.com/power/10092015/loesche-coal-mills-supplied-to-jaworzno-iii-power-unit-2839/


 

Embed article link: (copy the HTML code below):